Solar Energy
Thermal Heat Store Specification
| Hot water cylinder | Details |
|---|---|
| Description | Twin walled insulated hot water store |
| Type | Non vented pressure vessel |
| Capacity | 100-500 litres |
| No. of coils | 2 |
| Length of coil | 12 metres |
| Coil area | Top coil 0.4m², bottom coil 0.4m² |
| Inner tank material | Ceramic coated steel |
| Insulation material | High density polyurethane foam * |
| Insulation thickness | 40 mm |
| Exterior material | Plastic coated galvanised steel |
| Tested pressure (bar) | 6 bar (0.6Mpa ) |
| Immersion heater | Yes |
| Power of immersion heater | 2000 watts |
| CE mark | Yes |
| Electrical protection | Yes – RCD |
| Connections | ¾” |
| Factory fitted relief valves | Temperature and pressure |
| Sacrificial anode | Magnesium bar |
| Inner tank diameter | 542 mm |
| Overall dimensions | 620 x 1280 mm |
*The insulation is CFC free, polyurethane foam which is environmentally friendly. It is pressure injected for maximum coverage
The tank is factory fitted with a pressure and a temperature relief valve to comply with UK legislation.
The immersion heater meets EU standards and displays a CE mark.
The built-in thermostat for the immersion heater operates between 30-75°C